How To Turn Off Auto Stop On Chevy Equinox How to Turn 2026
The 2019 Chevy Equinox does not feature a permanent factory setting to disable the auto stop-start system, meaning you must manually turn it off for every trip or use an aftermarket bypass. Temporary disablement is easily achieved using the factory button, while permanent solutions require aftermarket wiring harnesses or driving in Low (L) mode.
To turn off the auto stop feature on a 2019 Chevy Equinox for your current drive, you must press the designated “A-off” button on the center console or dash every time you start the vehicle. Chevrolet did not include a permanent software switch in the infotainment system for this model year.
Dealing with the engine shutting off every time you come to a red light gets exhausting fast. By 2026, many owners are looking for definitive ways to bypass this system permanently. Here is exactly what you need to know about managing or disabling the auto stop feature in your 2019 Equinox.
Key Takeaways
- Press the ‘A-Off’ button on the center console to temporarily disable auto stop.
- The factory setting resets every time you restart the vehicle engine.
- Shifting into ‘L’ (Low) mode prevents the engine from shutting off at red lights.
- Aftermarket auto-stop eliminator harnesses offer a clean, plug-and-play permanent fix.
- Infotainment menus on the 2019 model do not include an option to disable auto stop.

Understanding Why the 2019 Chevy Equinox Auto Stop Cannot Be Disabled via Settings
The Factory Software Limitation
When you scroll through the MyLink infotainment system or the driver information center on your 2019 Chevy Equinox, you will not find a toggle switch for the auto stop-start system. General Motors programmed the vehicle to default to the “on” state every single time the ignition cycles. Federal fuel economy and emissions testing standards heavily influence this design. Because manufacturers must meet specific Corporate Average Fuel Economy targets, they are not required to provide a permanent software disable button for drivers.
What This Means for Daily Driving
Because you cannot turn it off permanently through a simple menu selection, you have to adopt a workaround. Relying solely on the factory configuration means building a physical habit every time you get behind the wheel. Drivers who dislike the wear on their starter motor or the delay at green lights find this limitation frustrating. Fortunately, you have a few options ranging from daily button presses to aftermarket hardware modifications.
- No permanent menu toggle exists in the 2019 model software.
- The vehicle resets to active auto stop upon every engine restart.
- Aftermarket solutions are required for a permanent fix.
2019 Chevy Equinox Expert Practical Guide
If you find yourself constantly annoyed by your engine cutting out at red lights, you are not alone. The 2019 Chevrolet Equinox features an automatic start-stop system designed to save fuel, but it can often feel jarring in heavy stop-and-go traffic. Because General Motors did not include a permanent physical “off” button on the dashboard for this model year, bypassing the feature requires specific workarounds. This comprehensive guide will walk you through the most effective methods to disable auto stop on your 2019 Chevy Equinox, ranging from temporary dashboard habits to permanent aftermarket solutions.
Step 1: Understand the Factory Temporary Disable Method
What you need: Your 2019 Chevy Equinox and a willingness to perform a quick action every time you drive.
Instructions: Sit in the driver seat and start your vehicle using the push-button ignition or key. Once the engine is running and the electronics have booted up, locate the shift lever on your center console. Shift the transmission out of the standard “Drive” (D) position and into “Low” (L) mode. Once in Low mode, use the +/- buttons located on the side of the shift knob to manually select your maximum gear (usually “9” for the 9-speed transmission). By selecting a manual gear range, the vehicle’s computer logic disables the automatic stop-start function, keeping your engine running continuously while you are stopped in traffic.
Pro Tip: Remember that you must repeat this process every single time you start the car, as the vehicle always defaults back to standard “Drive” upon ignition shutdown.
Step 2: Utilize the Hood Latch Switch Adjustment Technique
What you need: A flathead screwdriver and a flashlight.
Instructions: Open the hood of your 2019 Chevy Equinox and secure it with the prop rod. Locate the hood latch assembly positioned near the front center of the engine bay. The vehicle’s computer relies on a sensor in this latch to know if the hood is completely closed; if the hood is ajar, auto stop is automatically disabled as a safety measure. You can carefully adjust the rubber hood bumpers by twisting them slightly outward to trick the sensor, or disconnect the electrical wiring harness leading to the hood latch switch. Unplugging this sensor safely prevents the system from triggering the engine shut-off feature without causing a check engine light.
Pro Tip: Ensure that your vehicle’s dashboard does not display a continuous “Hood Open” warning message, as some trim levels will persistently alert you if the latch sensor is entirely disconnected.
Step 3: Research and Purchase an Auto Stop Eliminator Device
What you need: A dedicated plug-and-play auto stop disable module specifically designed for the 2019 Chevy Equinox, available from automotive aftermarket retailers.
Instructions: Go online and source a reputable “Auto Stop Eliminator” harness built for GM vehicles. These intelligent devices plug directly into the back of your factory auto-stop button or body control module wiring. The module remembers your last preferenceโessentially automating the task of pressing the disable button if your trim has one, or sending a persistent signal to the computer to keep the feature turned off. Follow the manufacturer-provided instructions to carefully remove the necessary lower dash panels or center console trim, unplug the factory harness, and plug the eliminator module safely in-line.
Pro Tip: Always disconnect your negative battery terminal before messing with any factory wiring harnesses to prevent accidental blown fuses or triggering airbag warning lights.
Step 4: Install the Hardware Module Behind the Dash
What you need: A plastic trim removal tool, a 7mm socket wrench, and your purchased bypass module.
Instructions: Use your plastic trim removal tool to gently pry away the surrounding bezel of your center console or gear selector area. Remove any exposed screws using your 7mm socket wrench to access the hidden wiring behind the dash. Locate the target wiring harness associated with the start-stop system or body control module. Unlatch the factory clip and insert the bypass module securely between the male and female ends of the vehicle wiring. Tuck the small processing box neatly away from moving parts or sharp metal edges, and zip-tie it down securely so it does not rattle while you drive.
Pro Tip: Take photos with your smartphone at every stage of disassembly so you have a visual reference for how clips, screws, and panels go back together.
Step 5: Reassemble Interior Trim Components
What you need: The removed trim pieces, screws, and your 7mm socket wrench.
Instructions: Carefully align all dashboard and center console panels back into their original positions. Press firmly along the edges of the plastic trim until you hear the metal and plastic clips snap securely back into place. Reinstall any previously removed screws and tighten them snugly, taking care not to over-tighten and crack the plastic housing. Clean up your workspace and ensure no tools were left rolling around the driver footwell, which could dangerously interfere with your brake or accelerator pedals.
Pro Tip: Check that all adjacent buttons, USB ports, and 12-volt accessory sockets function properly before calling the installation complete.
Step 6: Test Drive and Verify System Behavior
What you need: Your fully reassembled Chevy Equinox and a 5-to-10 minute test drive route.
Instructions: Start the engine of your Equinox. Observe the instrument cluster to ensure no unexpected warning lights, check engine lights, or service messages appear. Drive out of your driveway and approach the nearest stop sign or traffic light. Come to a complete, full stop while keeping your foot firmly on the brake pedal. Pay close attention to the tachometer and engine noise; the engine should remain running smoothly instead of shutting down. Perform this test at least three separate times to confirm the modification is working consistently.
Pro Tip: If the engine still shuts off during your test drive, turn the vehicle off immediately and review your installation steps to ensure the module is fully seated and receiving proper power.
โ Final Checklist
- Engine successfully stays running when coming to a complete stop at traffic lights
- No check engine lights, battery warnings, or safety alerts displayed on the driver information center
- All interior dash panels, center console pieces, and trim components securely snapped back into place
- Aftermarket wiring modules (if used) securely zip-tied away from moving pedals and steering columns
- Vehicle remote start and climate control functions operate normally without interference
Important Notes:
- Modifying factory wiring or disabling safety-related vehicle systems may impact certain aspects of your manufacturer powertrain warranty.
- If you are uncomfortable removing interior trim panels or working with automotive electrical harnesses, seek professional assistance from a certified mobile electronics installer or local mechanic.
- Estimated time for an aftermarket module installation is 30 to 60 minutes, with hardware costs typically ranging from $70 to $110 depending on the specific brand chosen.
How to Temporarily Turn Off Auto Stop Using the Factory Button
Locating the Disable Button
Your 2019 Chevy Equinox comes with a temporary factory override button. Look at your center console area, near the shifter, or on the lower switch bank beneath the climate controls. The button typically features the letter A surrounded by a circular arrow, accompanied by the word OFF or an indicator light. This switch is your primary tool for silencing the system during a commute.
Step-by-Step Temporary Deactivation
Using the factory button takes just a second, but you must remember to do it during your startup routine. Follow these quick steps:
- Get into your 2019 Chevy Equinox and press the push-to-start button or turn your key to start the engine.
- Locate the auto stop disable button on the center console or dash panel.
- Press the button once. An amber or orange indicator light on the button will illuminate, or a message will appear on your driver instrument cluster confirming the system is disabled.
- Drive normally. Your engine will stay running when you come to a complete stop.
Keep in mind that the moment you turn off the ignition, this setting resets. The next time you drive in 2026, you will need to press that button again unless you install an aftermarket bypass harness.
Step-by-Step Guide to Permanently Disabling Auto Stop With Aftermarket Fixes
For owners seeking a permanent solution for their 2019 Chevy Equinox, temporary button presses and steering column maneuvers are often insufficient. The most reliable method involves installing a dedicated aftermarket auto-stop eliminator harness. These plug-and-play modules remember your last button state or automatically send a signal to the powertrain control module to keep the feature turned off.
Installing an Auto-Stop Eliminator Harness
Automotive electronics technicians recommend using a harness that connects directly behind the factory switch bank without cutting or splicing wires. This preserves vehicle resale value and maintains warranty compliance under the Magnuson-Moss Warranty Act. Complete the installation by following these steps carefully:
- Disconnect the negative battery terminal to prevent electrical shorts or triggering airbag diagnostic trouble codes.
- Use a plastic trim removal tool to gently pry away the center console bezel surrounding the auto-stop and climate control buttons.
- Unplug the factory wiring harness connected to the back of the switch plate.
- Plug the aftermarket eliminator harness inline between the factory plug and the switch plate.
- Secure the small module box safely behind the dashboard using industrial zip ties or foam tape to prevent rattling.
- Reattach the bezel, reconnect the battery terminal, and start the vehicle to test the automated override functionality.
What to Do If the Auto Stop Bypass Fails or Triggers Dashboard Warning Lights
Occasionally, aftermarket modifications or complex vehicle computer states can trigger unexpected dashboard notifications or cause the bypass module to malfunction. If your 2019 Chevy Equinox displays a Check Engine Light or service messages after installation, swift diagnostic action is required to resolve the issue.
Troubleshooting Failed Bypass Modules
Electrical engineers and professional mechanics outline specific protocols to address bypass failures safely:
- Verify that all wire harness connectors are fully seated and locked into place, as loose pins frequently cause intermittent signal drops.
- Perform a hard reset of the vehicle electronics by disconnecting the battery for 15 full minutes, allowing all control modules to clear temporary fault codes.
- Scan the OBD-II port using an advanced diagnostic tool to check for active communication codes between the body control module and the switch bank.
- Consult professional automotive technicians if dashboard warning lights persist, as specialized reprogramming at a dealership may be necessary. Professional diagnostics typically range from $100 to $200, while module replacements average $70 to $130 in labor costs.
Conclusion
Eliminating the intrusive auto-stop feature on a 2019 Chevy Equinox significantly improves driving comfort and reduces long-term starter wear. While temporary interior buttons offer quick relief, dedicated hardware bypasses provide a permanent, maintenance-free solution. According to verified research and expert automotive sources, utilizing a plug-and-play eliminator harness is the safest method to regain full control over your vehicle. Take the next step today by selecting a reputable, vehicle-specific bypass module that fits your specific Equinox trim level.
โ Frequently Asked Questions
Why did Chevrolet design the 2019 Equinox without a permanent auto stop disable button?
Automakers program auto stop-start systems into modern vehicles to meet corporate average fuel economy (CAFE) standards and reduce tailpipe emissions during city driving. Because these ratings are calculated with the system active, manufacturers typically do not provide a permanent factory off switch.
Does using the factory auto stop button harm the starter motor?
No, vehicles equipped with auto stop features utilize heavy-duty starter motors, reinforced ring gears, and upgraded auxiliary batteries engineered to handle frequent engine restarts without premature failure.
Are plug-and-play auto stop eliminator harnesses safe for the electrical system?
Most high-quality harness kits are designed to mimic the manual pressing of the button upon startup by sending a brief signal to the BCM. They use OEM-style connectors and generally pose no risk to your vehicle’s sensitive electronics when installed correctly.
Can pulling a fuse disable the auto stop feature on a 2019 Chevy Equinox?
While pulling specific fuses related to hood latches or battery sensors can trick the vehicle into disabling auto stop, it often triggers check engine lights and disables other vital safety systems like remote start. This method is generally not recommended.
Does the auto stop system function when the vehicle’s engine is cold?
No, the vehicle’s computer automatically prevents the auto stop feature from engaging until the engine and transmission reach optimal operating temperatures and the climate control system stabilizes.
What happens to my AC when the auto stop activates at a red light?
When the engine shuts off, the air conditioning compressor stops pumping cold air, though the blower fan usually continues to run. If the cabin temperature begins to rise significantly, the engine will automatically restart to maintain climate comfort.
